Cena promocyjna$202.00 USDCena regularna$310.00 USD
Poziom trudnościEkspert
Elementy3 226
Czas budowy18–30 godz.
Darmowa wysyłka·Ze śledzeniem pod same drzwi
Gwarancja na brakujące elementy
Bezpłatna wymiana każdego brakującego lub uszkodzonego elementu.
Papierowa instrukcja krok po kroku
Części pogrupowane według sekcji
Darmowa wysyłka ze śledzeniem na cały świat
Opinie zweryfikowanych kupujących
~25 godzin budowy
Poziom średniozaawansowany
Specyfikacja
27,2 x 18,1 x 9,8 cala
(69 x 46 x 25 cm)
3 226 elementów
Oświetlenie wnętrza LED
Opis
Model ekspozycyjny modułu głównego nowoczesnej stacji kosmicznej, zbudowany z 3 226 elementów. Po złożeniu ma 27,2 cala (69 cm) długości i stoi na własnym, pochylonym stojaku ekspozycyjnym.
Stacja składa się z trzech sekcji: dużego cylindra, małego cylindra i modułu węzłowego z portami dokującymi. Po zdjęciu paneli kadłuba zobaczysz w pełni wyposażone wnętrze z bieżnią, rowerkiem treningowym, stanowiskami załogi i miejscami do spania. W zestawie jest dziewięć minifigurek astronautów. Zestaw oświetlenia LED podświetla kabinę od środka, a włączasz go i wyłączasz na kadłubie.
27,2 x 18,1 x 9,8 cala (69 x 46 x 25 cm) po złożeniu
3 226 elementów w ponumerowanych woreczkach
Oświetlenie wnętrza LED z włącznikiem
Zdejmowane panele kadłuba i wyposażone wnętrze
9 minifigurek: trzech astronautów, po trzy stroje dla każdego
Dwa elastyczne panele słoneczne
Ramię robotyczne wzdłuż kadłuba
Stojak ekspozycyjny z tabliczką z datą startu
Drukowana instrukcja krok po kroku
Co jest w pudełku
📦 Co jest w pudełku
3 226 elementów konstrukcyjnych w ponumerowanych woreczkach
Zestaw oświetlenia wnętrza LED
9 minifigurek astronautów (trzech astronautów, po trzy stroje dla każdego)
Arkusz naklejek do detali kabiny
Elementy stojaka ekspozycyjnego
Drukowana instrukcja montażu krok po kroku
FAQ
❓ Najczęściej zadawane pytania
Czy zestaw jest kompatybilny z klockami największych marek?
Tak. Nexus Brick korzysta z tego samego standardu łączenia co wiodące systemy klocków. Elementy łączą się identycznie, z tymi samymi tolerancjami i trwałością.
Ile trwa budowa?
Łącznie około 25 godzin, w zależności od twojego tempa, zwykle rozłożone na wieczory przez tydzień lub dwa. Poziom trudności: Średniozaawansowany.
Co zrobić, jeśli po dostawie brakuje elementu lub jest on uszkodzony?
Oferujemy gwarancję bezpłatnej wymiany. Napisz na adres support@nexusbrick.com z numerem zamówienia i zdjęciem, a zamiennik wyślemy bezpłatnie.
Czy wysyłacie na cały świat?
Tak, darmowa wysyłka ze śledzeniem na cały świat przy każdym zamówieniu. Numer przesyłki dostaniesz e-mailem, gdy tylko zamówienie zostanie wysłane.
Jakie są zasady zwrotów?
30-dniowa gwarancja zwrotu pieniędzy na nieotwarte zestawy. Jeśli zmienisz zdanie, skontaktuj się z obsługą klienta, a zorganizujemy zwrot.
Czy w zestawie są minifigurki?
Tak, dziewięć: trzech astronautów, każdy w trzech różnych strojach, w tym w białym skafandrze kosmicznym.
Czy model się świeci?
Tak. W kabinie wbudowany jest zestaw oświetlenia LED, a mały przełącznik na kadłubie pozwala go włączać i wyłączać.
Jak duży i ciężki jest gotowy model?
Około 27,2 x 18,1 x 9,8 cala (69 x 46 x 25 cm) z zamontowanymi panelami słonecznymi. Zaplanuj miejsce na półce lub biurku o szerokości co najmniej 30 cali (75 cm) i głębokości 20 cali (50 cm).
Czy potrzebuję narzędzi, kleju lub dodatkowych elementów?
Bez kleju i bez narzędzi. Wszystkie klocki, zestaw oświetlenia LED i drukowana instrukcja krok po kroku są w pudełku.
Czy to trudne? Dla kogo jest ten zestaw?
To zestaw dla dorosłych: 3 226 elementów i w pełni wyposażone wnętrze, poziom średniozaawansowany. Doświadczenie z klockami pomaga, ale ważniejsza jest cierpliwość. Instrukcja prowadzi przez kolejne ponumerowane woreczki, więc możesz przerwać po dowolnym etapie i wrócić do składania następnego wieczoru.
Wysyłka i zwroty
Darmowa wysyłka na cały świat Ze śledzeniem przy każdym zamówieniu, gdziekolwiek jesteś.
Gwarancja bezpłatnej wymiany Brakujące lub uszkodzone elementy? Zamienniki wyślemy bezpłatnie.
30 dni na zwrot pieniędzy Nieotwarte zestawy możesz zwrócić w ciągu 30 dni i otrzymać pełny zwrot pieniędzy.
Trzy moduły, dwa skrzydła paneli słonecznych i podświetlana kabina, a wszystko na własnym stojaku ekspozycyjnym.
Oświetlenie wnętrza
Podświetlona od środka
W kabinie wbudowano zestaw LED. Przestaw mały przełącznik na kadłubie, a wnętrze się rozświetli.
Zdejmowany kadłub
Zdejmij kadłub, poznaj załogę
Po zdjęciu paneli kadłuba widać wyposażoną kabinę: bieżnię, rower stacjonarny, stanowiska załogi i kabiny sypialne. Wprowadza się do niej dziewięć minifigurek astronautów.
Zbudowana jak prawdziwa stacja
Węzeł dokujący
Z przodu moduł węzłowy z portami dokującymi i pierścieniem włazu ze złotym wykończeniem.
Podwójne panele słoneczne
Dwa elastyczne skrzydła paneli słonecznych rozpościerają się od środka stacji.
Ramię robotyczne
Wzdłuż kadłuba biegnie długie ramię, a na modułach są punkty zaczepienia.
Stojak ekspozycyjny
Pochylony niebieski stojak z chmurami u dołu i tabliczką z datą startu.
Pierwowzór
Wzorowany na prawdziwym module głównym
Duży cylinder, mały cylinder i moduł węzłowy w takim samym układzie jak w module o długości 54 stóp (16,6 m), wystrzelonym 29 kwietnia 2021 roku.
Wymiary
Z rozłożonymi panelami słonecznymi ma ponad dwie stopy długości. Przygotuj dla niego miejsce na półce o szerokości około 30 cali (75 cm) i głębokości 20 cali (50 cm).
Zweryfikowani kupujący
Co mówią modelarze, gdy model stoi już na półce
Każdą z poniższych opinii wystawił zweryfikowany klient po otrzymaniu zamówienia. Nie edytujemy ich.
Customer Reviews
Overall rating: 4.4 / 5 from 539 reviews.
I am almost half way through the build.. very pleased with the product. I am enjoying build. To date I am two small yellow circles missing from suspension and I have had one piece which can't be used as it is deformed. Also one of the small clear plastic cog wheels has a chipped rib which catches under operation.. can I obtain the additional yellow pieces and perhaps two additional cog wheels. I can send photos if required.
Thank you
Regards David Hill
This is a really fun and challenging build. I just started bag 9 and have spent over 17 hours on it. I really wish I had spent the extra money to get the remote control build though. Can't wait to finish it and show it off.
So far so good. Really enjoying the build so far. I wish there was a pdf version of the manual so I can zoom in on assembly portion to get closer look at where the parts line up. The printed version its sometimes difficult to tell. Can't wait to finish!
I’m very excited to receive the model only to find there is no motors with it. The picture what sold me them the car and all the motors on it? I feel I’ve been mislead a bit. Yes it is in the description three pages down but the photograph has got all the motors in it which which suggests that you’re getting everything I don’t think I’ll be buying anymore
Went together well but...I cant get the suspension to work up or down. The car goes backwards pretty fast but does not go forward and then clicks into neutral after a couple seconds. Headlamps to not go on. Convertible roof does work but doesn't seem sturdy. Kind of frustrating....but to be fully transparent, I should have tested all the motors as I was assembling. 1st time doing 1/8 scale car so maybe rookie mistakes?
What an incredible construction set! The quality of the piece is top notch and the fun is optimal.
I wanted a challenge and I met my challenge. This is not an easy build, but it’s ok, I wanted it to be challenging. The printed manual is very small, and I have made many mistakes along the way because I did not properly identify several parts that were slightly different from each other. So I ended up more than once with missing pieces at the end of a section, with extra pieces that I did not need: come to find out, I used the wrong parts several steps earlier. I just had to reverse the build, swap the parts and rebuild the section.
So much fun. The remote control section was the most challenging for me, but I figured it out and it works great! So many intricate details in this car!
I will definitely order more of those kits in the future.
Finished built but need to check wiring is connected to the batteries in the right way and something not right with rear spoiler but all in all a fantastic build
Missing Motor, No Collector's Box, Damaged Package.
I am writing to report a problem with a recent order for the 1:8 scale 488 Pista model.
According to the product listing, this set should include:
- Remote-controlled drive with an electric motor
- A 4-speed gearbox and front/rear LED lights
- The model delivered in the Nexus Brick Collector's Box
However, what I received does not match this description:
1. No electric motor – The parts I received do not include the electric motor needed for the remote-controlled drive function. The model I received is not actually remote-controlled, despite this being one of the advertised key features.
2. No Collector's Box – The listing states the model is "Delivered in the Nexus Brick Collector's Box," but no such box was included in my shipment.
3. Damaged packaging – The outer parcel arrived damaged and broken, which may have contributed to missing contents.
Given these discrepancies, it appears I either received an incomplete kit or the wrong model/version entirely.
Attached is a video of the contents received if that would help with your investigation.
It certainly has been a very challenging build for this 72 yr old. I finally received the large version of the manual and it has been a big, big help. Part sizes & colors are way easier to comprehend. I've had to build, disassemble, rebuild multiple times. I'm currently up to step 457 of 806 & trying to build the RC version. Unfortunately, I've run into another glitch as when I install the rear power block, the step doesn't fit onto the existing chassis. Fortunately, I've got a young, mechanical engineering genius neighbor, who's helped on these later stages. At times, it's been a frustrating build, but I'm getting there So far, the motors I've installed all work properly. So far, I've been missing about 8 parts (usually, the smaller ones), but between my own inventory, my 2 neighbors', and the local brick store, I've found replacements. I'm taking my time w/ this one, but hope to finish it over the next couple weeks (or at least before Thanksgiving). I've found Nexus Customer Service to be very (w/ a capital V) responsive, though it took 18 days for the large manual to get here. Wish me luck on the 2nd half of this build. I need all the help I can get.
Just finished the McLaren 720, took a long time. The instruction manual has lots and lots and lots of errors, I was also missing pieces but was lucky I had them in my lego parts box. I am also having trouble with the door closing correctly. It still looks good.
I had been waiting for LEGO to release a trike kit for years and now I don’t have to wait anymore. Overall this kit is excellent. Very creative. Except for the pipes that were designed to use flexible parts but the parts supplied were not flexible. Original LEGO parts may have worked better but with some modifications I made it work. I also changed the connection parts for the front wheel brakes to make them hold. Only one part was missing, the tubing that runs along the top of the seat. It wasn’t critical for the build so I completed the kit without it. At times the instructions were tricky to follow but challenge is good and I figured it out in the end. Delivery was pretty quick with no surprise customs charges which was nice.
I’ve been waiting for LEGO to release a trike kit for years but now I don’t have to wait anymore. Overall this MOC is excellent. Very creative. Except for the pipes that were designed to use flexible pieces but weren’t in this case, everything went together well. Authentic LEGO pieces might be better in this case. Only one piece was missing from the kit, tubing that was to sit along the seat top, but it was strictly aesthetic so not critical to the build. At times the instructions were tricky to follow but challenge is good. Delivery was pretty quick with no surprises from customs. Using regular mail delivery is a good idea for international customers.
Really enjoyed building the Zenith 720S. The whole build was a lot of fun, and the parts fit together really well. You can tell a lot of thought has gone into the design.
I’m taking off one star mainly because of the transparent plastic gears used for the main drive shaft. Unfortunately, mine broke within about 10 minutes of running the car. I replaced them with harder plastic gears, and they’ve been holding up fine since.
Changing the gears was definitely a bit of a pain, but I was actually impressed that I could take the model apart, make the change, and put everything back together without breaking any other parts. The parts are really well made and quite sturdy.
Overall, a really fun build and I’m happy with it. I just wish the original drive-shaft gears were made from a more durable material.
It's not a first time modeler's kit, that's for sure. The material and engineering is superb, and everything fits perfectly.
My only issue is the build manual. It's good, but not great. The kit sized manual is NOT 1:1, so identifying parts can be a challenge in some spots. Also, detail is hard to pick up because the pages aren't big enough. Someone at Nexus sent me a link to a google doc which was a repository of all the instructions in PDF format. That was a game changer, and it should be included (the link) with every kit sold. I had the pdf open on my computer right in front of my work area and could zoom in as closely as I needed.
I'm still struggling through the installation of the motors and running the cabling, but all the mechanical components were perfect and easy.
I'm already scanning the site for my next project.
This was an enjoyable, complex kit to assemble and took about three months but was not worked on continuously. And, most pauses were to work out many modifications without taking away anything from the original design. ZERO missing parts and even a few extras. Top notch quality of all parts throughout the build. I’d rate this one an 11 out of 10. Modifications included stripe/body coloring to stock (no paint), wheel and caps color, McLaren720S badging including mango brake calipers, cables run through chassis/floor to hide them, independent opening doors, clear headlight lens, body gaps filled with spare parts, tighter securing of body panels, separated body remote controls from driving and changed battery pack placement so the passenger seat could remain in place. The car features all work as advertised and the Nexus staff responded to emails quickly.
My original order got lost somewhere in the system but Nexus sorted the problem and arranged a replacement Item which has arrived within a week. In process of the build now, some pictures for rear section watch out with the gears easily to make a mistake.
Loved the Zenith 720s, a challenging build but excellent quality pieces and everything was in the box as expected (no missing pieces). Had one mid-build issue with one of the ratchet pieces for the engine cover lift not doing what it was supposed to. Messaged Nexus Bricks and they immediately dispatched a replacement piece to me in Australia with no questions asked - excellent service. Only wish the instruction manual was printed in A4 (rather than A5) so some of the smaller pieces could be identified a little easier and the assembly instruction while good would have benefited from a larger printed manual. Managed with a magnifying glass.
I received my nexus 720s and let me tell you it is Amazing I love it so intricate and so many details like the disc brakes I could go on but I have limited characters but it's Amazing
I spend more time looking for pieces than I thought I would be. The numbering on the bags made no sense and was not explained in the directions more.
Instructions should be enlarged and better explanations
It was a challenging and exciting build. My only complaint is one of the hydraulics for the doors was broken so only one will move with the remote control
I still haven't received the instruction manual missing from the box.
The model is about 3/4 complete. It is a good build. Most parts probably fit tighter than on other models I have done from a similar company.
However, I have converted the remote controlled door opening back to manual opening as one of the components failed during first test operation.
Hope the rest of the RC components operate satisfactorily when completed. Enjoyable.
Well constructed and booklet should probably be bigger but using in conjunction with down load of booklet. Disappointed that the booklet was with the rest of the model. All good now and enjoying though early in construction.
Starting step 9. Been a ball but watch VERY carefully as you build. easy to get the wrong part or pin a wrong hole. If it doesn't seem right stop and verify. This will save you time later.